Mudanças entre as edições de "Meu laptop"

De MochilaWiki
Ir para navegaçãoIr para pesquisar
Linha 3: Linha 3:
 
  Processador Intel Core Duo T2080 1,73 GHz
 
  Processador Intel Core Duo T2080 1,73 GHz
 
  Cache (L2) 1 MB
 
  Cache (L2) 1 MB
 +
80GB(5400rpm) SATA
 +
512+512MB DDR2 (533MHz)
 +
15.4" Wide XGA VA (1280 x 800)
 +
DVD-Super-Multi (+-R DL)
 +
ATI Radeon® Xpress 200M con Hypermemory (256 MB)
 +
Wireless 802.11b/g
 +
Ethernet LAN - 10/100 Base-TX
 +
AC adapter input 100~240 V, 50/60 Hz
 
  Front Side Bus 667 MHz
 
  Front Side Bus 667 MHz
Chipset ATI Radeon Xpress 200M
 
Memoria ram DDR2 533 MHz (PC4200)
 
WideScreen 15,4 inch - WXGA TFT
 
HD 80 GB - 5400 rpm
 
DVD-RW
 
Placa de video ATI Radeon Xpress 200M com 128 MB
 
LAN 100 Mbps
 
Wireless 802.11 A/B/G
 
 
  Modem 56 Kbps
 
  Modem 56 Kbps
 
  USB 2.0 2x
 
  USB 2.0 2x
Firewire (1394a) 1x
 
 
  PCMCIA 1x
 
  PCMCIA 1x
  AC adapter input 100~240 V, 50/60 Hz
+
  Tamanho(lxpxh) : 358 x 262 x 37 mm
 +
Peso : 2.74 kg
  
 
banto@cajuzinho:~$ lspci
 
banto@cajuzinho:~$ lspci
Linha 96: Linha 96:
 
  # make install
 
  # make install
 
  # alsaconf
 
  # alsaconf
 +
# echo

Edição das 13h50min de 17 de junho de 2007

Configuraçao da màquina:

Toshiba Satellite L30-10T
Processador Intel Core Duo T2080 1,73 GHz
Cache (L2) 1 MB
80GB(5400rpm) SATA
512+512MB DDR2 (533MHz)
15.4" Wide XGA VA (1280 x 800)
DVD-Super-Multi (+-R DL)
ATI Radeon® Xpress 200M con Hypermemory (256 MB)
Wireless 802.11b/g
Ethernet LAN - 10/100 Base-TX
AC adapter input 100~240 V, 50/60 Hz
Front Side Bus 667 MHz
Modem 56 Kbps
USB 2.0 2x
PCMCIA 1x
Tamanho(lxpxh) : 358 x 262 x 37 mm
Peso : 2.74 kg 

banto@cajuzinho:~$ lspci

00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
09:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
09:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
09:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)

banto@cajuzinho:~$ df -h

Sist. Arq.            Tam   Usad Disp  Uso% Montado em
/dev/sda1             9,2G  2,1G  6,7G  24% /
/dev/sda6             9,2G  550M  8,2G   7% /home
/dev/sda3              55G  180M   52G   1% /arquivos

sistema operacional, aplicativos e drivers

  • GNU/Linux Debian Etch 4.0
  • KDE 3.5

Placa atheros

acrescente em seu sources.list

deb-src http://ftp.br.debian.org/debian stable main non-free contrib

-- baixe os pacotes:

# apt-get install module-assistant debhelper build-essential wireless-tools madwifi-tools madwifi-source

-- compilando:

# m-a prepare
# m-a a-i madwifi

-- carregado módulo:

# modprobe ath_pci

retirado de http://banto.hipatia.info/softwarelivre/atheros.html

Instalando o driver da ATI

echo "deb http://ftp.br.debian.org/debian/ stable  main contrib non-free" >> /etc/apt/sources.list 
apt-get update 
apt-get install module-assistant fglrx-control fglrx-kernel-src fglrx-driver
m-a update
m-a a-i fglrx-kernel-src
aticonfig --initial

Reinicie o computador.

retirado de forumdebian.com.br

Placa de som

$ wget -c ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.14.tar.bz2
$ tar jxvf alsa-driver-1.0.14.tar.bz2
$ cd alsa-driver-1.0.14
$ ./configure
$ make
# make install
$ wget -c ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.14a.tar.bz2
$ tar jxvf alsa-lib-1.0.14a.tar.bz2
$ cd alsa-lib-1.0.14a
$ ./configure
$ make
# make install
$ wget -c ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.14.tar.bz2
$ tar jxvf alsa-utils-1.0.14.tar.bz2
$ cd alsa-lib-1.0.14a
$ ./configure
& make
# make install
# alsaconf
# echo