Mudanças entre as edições de "Sk1"

De MochilaWiki
Ir para navegaçãoIr para pesquisar
 
(3 revisões intermediárias por 2 usuários não estão sendo mostradas)
Linha 1: Linha 1:
 +
* http://sk1project.org/
 +
 
sk1 em debian etch
 
sk1 em debian etch
$ mkdir sk1
+
 
$ cd sk1
+
$ mkdir sk1
$ wget -c http://sk1project.org/downloads/sk1/sk1_0.9.0-rev335-1_i386.deb
+
<source lang="bash">
$ wget -c http://sk1project.org/downloads/tcl_tk/tcl8.5_8.5.0-2_i386.deb
+
$ cd sk1
$ wget -c http://sk1project.org/downloads/tcl_tk/tk8.5_8.5.0-3_i386.deb
+
$ wget -c http://sk1project.org/downloads/sk1/sk1_0.9.0-rev335-1_i386.deb
$ wget -c http://sk1project.org/downloads/pylcms/python-liblcms_1.15-1_i386.deb
+
$ wget -c http://sk1project.org/downloads/tcl_tk/tcl8.5_8.5.0-2_i386.deb
#  apt-get install python-imaging
+
$ wget -c http://sk1project.org/downloads/tcl_tk/tk8.5_8.5.0-3_i386.deb
# dpkg -i *.deb
+
$ wget -c http://sk1project.org/downloads/pylcms/python-liblcms_1.15-1_i386.deb
 +
#  apt-get install python-imaging
 +
# dpkg -i *.deb
 +
</source>
  
 
Uniconverter em debian etch:
 
Uniconverter em debian etch:
$ wget -c http://sk1project.org/downloads/uniconvertor/v1.1.3/uniconvertor-1.1.3.tar.gz
+
<source lang="bash">
$ tar zxvf uniconvertor-1.1.3.tar.gz
+
$ wget -c http://sk1project.org/downloads/uniconvertor/v1.1.3/uniconvertor-1.1.3.tar.gz
$ cd UniConvertor-1.1.3/
+
$ tar zxvf uniconvertor-1.1.3.tar.gz
# apt-get install python-dev python-imaging build-essential
+
$ cd UniConvertor-1.1.3/
# python setup.py install
+
# apt-get install python-dev python-imaging build-essential
 +
# python setup.py install
 +
</source>
 +
 
 +
Ubuntu 16.04
 +
<source lang="bash">
 +
wget "https://sk1project.net/dc3.php?version=2.0rc2&target=python-sk1-2.0rc2_0ubuntu1_16.04_amd64.deb" -O sk1.deb
 +
sudo dpkg -i sk1.deb
 +
sudo apt-get install -f
 +
</source>
 +
 
 +
referência
 +
* http://www.edivaldobrito.com.br/corel-draw-para-linux-conheca-sk1/
 +
 +
[[Categoria:Gráfico]]

Edição atual tal como às 14h03min de 3 de abril de 2017

sk1 em debian etch

$ mkdir sk1

$ cd sk1
$ wget -c http://sk1project.org/downloads/sk1/sk1_0.9.0-rev335-1_i386.deb
$ wget -c http://sk1project.org/downloads/tcl_tk/tcl8.5_8.5.0-2_i386.deb
$ wget -c http://sk1project.org/downloads/tcl_tk/tk8.5_8.5.0-3_i386.deb
$ wget -c http://sk1project.org/downloads/pylcms/python-liblcms_1.15-1_i386.deb
#  apt-get install python-imaging
# dpkg -i *.deb

Uniconverter em debian etch:

$ wget -c http://sk1project.org/downloads/uniconvertor/v1.1.3/uniconvertor-1.1.3.tar.gz
$ tar zxvf uniconvertor-1.1.3.tar.gz
$ cd UniConvertor-1.1.3/
# apt-get install python-dev python-imaging build-essential
# python setup.py install

Ubuntu 16.04

wget "https://sk1project.net/dc3.php?version=2.0rc2&target=python-sk1-2.0rc2_0ubuntu1_16.04_amd64.deb" -O sk1.deb
sudo dpkg -i sk1.deb
sudo apt-get install -f

referência