Mudanças entre as edições de "Meu laptop"

De MochilaWiki
Ir para navegaçãoIr para pesquisar
 
(4 revisões intermediárias por 3 usuários não estão sendo mostradas)
Linha 10: Linha 10:
 
  Wireless 802.11b/g
 
  Wireless 802.11b/g
 
  Ethernet LAN - 10/100 Base-TX
 
  Ethernet LAN - 10/100 Base-TX
−
  AC adapter input 100~240 V, 50/60 Hz - output 19v
+
  AC adapter input 100~240 V, 3.42A, 50/60 Hz - output 19v
 
  Front Side Bus 667 MHz
 
  Front Side Bus 667 MHz
 
  Modem 56 Kbps
 
  Modem 56 Kbps
Linha 18: Linha 18:
 
  Peso : 2.74 kg  
 
  Peso : 2.74 kg  
  
−
banto@cajuzinho:~$ lspci
+
banto@camito:~$ lspci
 
  00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
 
  00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
 
  00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
 
  00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
Linha 35: Linha 35:
 
  09:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
 
  09:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
  
−
banto@cajuzinho:~$ df -h
+
root@camito:#~ fdisk -l
−
Sist. Arq.            Tam  Usad Disp  Uso% Montado em
+
 
−
/dev/sda1            9,2G  2,1G  6,7G  24% /
+
Disk /dev/sda: 80.0 GB, 80026361856 bytes
−
/dev/sda6            9,2G  550M  8,2G  7% /home
+
 
−
/dev/sda3              55G  180M  52G  1% /arquivos
 
  
 
== sistema operacional, aplicativos e drivers ==
 
== sistema operacional, aplicativos e drivers ==
Linha 45: Linha 44:
 
* GNU/Linux Debian Etch 4.0
 
* GNU/Linux Debian Etch 4.0
 
* KDE 3.5
 
* KDE 3.5
 +
 +
 +
na primeira tela do instalador eu acrescentei:
 +
install vga=771
 +
 +
E to usando criptografia com lvm
 +
 +
meu sources.list
 +
# apt-get update
 +
# apt-get upgrade
 +
# apt-get remove iceweasel
 +
# apt-get remove dhcdbd
 +
 +
 +
'''Placa de Vídeo'''
 +
 +
configura automáticamente com driver da ati
  
 
'''Placa atheros'''
 
'''Placa atheros'''
  
 
acrescente em seu sources.list
 
acrescente em seu sources.list
−
  deb-src http://ftp.br.debian.org/debian stable main non-free contrib
+
  deb http://ftp.br.debian.org/debian stable main non-free contrib
  
 
-- baixe os pacotes:
 
-- baixe os pacotes:
−
  # apt-get install module-assistant debhelper build-essential wireless-tools madwifi-tools madwifi-source
+
  # apt-get install module-assistant debhelper build-essential wireless-tools madwifi-tools madwifi-source wpasupplicant wpagui
  
 
-- compilando:
 
-- compilando:
Linha 61: Linha 77:
 
  # modprobe ath_pci
 
  # modprobe ath_pci
  
−
retirado de http://banto.hipatia.info/softwarelivre/atheros.html
+
retirado de http://banto.hipatia.net/softwarelivre/atheros.html
−
 
 
−
'''Instalando o driver da ATI'''
 
−
echo "deb http://ftp.br.debian.org/debian/ stable  main contrib non-free" >> /etc/apt/sources.list
 
−
apt-get update
 
−
apt-get install module-assistant fglrx-control fglrx-kernel-src fglrx-driver
 
−
m-a update
 
−
m-a a-i fglrx-kernel-src
 
−
aticonfig --initial
 
−
 
 
−
Reinicie o computador.
 
−
 
 
−
retirado de [http://wiki.forumdebian.com.br/index.php/Instalando_o_driver_da_ATI_no_Debian_Etch_%C3%A0_moda_Debian forumdebian.com.br]
 
  
 
'''Placa de som'''
 
'''Placa de som'''
  
−
  $ wget -c ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.14.tar.bz2
+
  $ wget -c ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.15.tar.bz2
−
  $ tar jxvf alsa-driver-1.0.14.tar.bz2
+
  $ tar jxvf alsa-driver-1.0.15.tar.bz2
−
  $ cd alsa-driver-1.0.14
+
  $ cd alsa-driver-1.0.15
−
  $ ./configure
+
  $./configure --with-sequencer=yes
−
$./configure --with-cards=hda-intel --with-sequencer=yes
 
 
  $ make
 
  $ make
 
  # make install
 
  # make install
−
  $ wget -c ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.14a.tar.bz2
+
  $ wget -c ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.15.tar.bz2
−
  $ tar jxvf alsa-lib-1.0.14a.tar.bz2
+
  $ tar jxvf alsa-lib-1.0.15.tar.bz2
−
  $ cd alsa-lib-1.0.14a
+
  $ cd alsa-lib-1.0.15
 
  $ ./configure
 
  $ ./configure
 
  $ make
 
  $ make
 
  # make install
 
  # make install
−
  $ wget -c ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.14.tar.bz2
+
  $ wget -c ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.15.tar.bz2
−
  $ tar jxvf alsa-utils-1.0.14.tar.bz2
+
  $ tar jxvf alsa-utils-1.0.15.tar.bz2
−
  $ cd alsa-lib-1.0.14a
+
  $ cd alsa-lib-1.0.15
 
  $ ./configure
 
  $ ./configure
 
  & make
 
  & make
 
  # make install
 
  # make install
−
  # echo "options snd-hda-intel model=3stack" >> /etc/modprobe.d/alsa-base
+
  # echo "options snd-hda-intel options snd-hda-intel model=6stack-digout" >> /etc/modprobe.d/alsa-base
 
  # update-modules
 
  # update-modules
 
  # alsaconf
 
  # alsaconf
  
−
'''encondind'''
+
'''Enconding'''
  
 
por padrao o debian etch vem na codificacao utf-8, ate porque o gnome (interface padrao) usa esse tipo de codificacao. Mas eu uso KDE e todos meus arquivos estao em iso-18
 
por padrao o debian etch vem na codificacao utf-8, ate porque o gnome (interface padrao) usa esse tipo de codificacao. Mas eu uso KDE e todos meus arquivos estao em iso-18
Linha 112: Linha 115:
 
  dpkg-reconfigure locales
 
  dpkg-reconfigure locales
  
−
deixo em pt_BR ISO-8859-1
+
deixei em pt_BR ISO-8859-1
 +
 
 +
'''Desligando Beep'''
  
−
*'''desligando beep'''
 
 
coloco no iniciar do KDE para desligar
 
coloco no iniciar do KDE para desligar
  
−
  $ echo "#!/bin/bash" > $HOME/.kde/Autostart/desligasom.sh
+
  echo '#!/bin/bash' > $HOME/.kde/Autostart/desligasom.sh
−
  $ echo "xset b off" >> $HOME/.kde/Autostart/desligasom.sh
+
  echo "xset b off" >> $HOME/.kde/Autostart/desligasom.sh
−
  $ setterm -blength 0" >> $HOME/.kde/Autostart/desligasom.sh
+
  echo "setterm -blength 0" >> $HOME/.kde/Autostart/desligasom.sh
−
  $ chmod 777 $HOME/.kde/Autostart/desligasom.sh
+
  chmod 777 $HOME/.kde/Autostart/desligasom.sh
−
 
 
−
*'''grub'''
 
−
dei um trato no grub acertando opcao de senha para edicao e tambem com resolucao 800x600 passando de
 
−
kernel          /boot/vmlinuz-2.6.18-4-686 root=/dev/sda1 ro
 
−
 
 
−
para
 
−
kernel          /boot/vmlinuz-2.6.18-4-686 vga=771 root=/dev/sda1 ro
 
−
 
 
−
*'''thunderbird+enigmail'''
 
−
$ wget -c http://laotzu.acc.umu.se/pub/mozilla.org/thunderbird/releases/2.0.0.0/linux-i686/pt-BR/thunderbird-2.0.0.0.tar.gz
 
−
$ tar zxvf thunderbird-2.0.0.0.tar.gz
 
−
# mv thunderbird /usr/share
 
−
# ln -s /usr/share/thunderbird/thunderbird /usr/bin
 
−
$ wget --no-check-certificate https://addons.mozilla.org/en-US/thunderbird/downloads/file/16424/enigmail-0.95.1-tb+sm.xpi
 
−
 
 
−
Abra o Thunderbird e va em Ferramentas > Complementos > Instalar > localize o arquivo .xpi > instale e reinicie o aplicativo.
 
−
 
 
−
*'''firefox'''
 
−
$ wget -c http://mozilla.mirror.ac.za/firefox/releases/2.0.0.4/linux-i686/pt-BR/firefox-2.0.0.4.tar.gz
 
−
$ tar zxvf firefox-2.0.0.4.tar.gz
 
−
# mv firefox /usr/share
 
−
# ln -s /usr/share/firefox/firefox /usr/bin
 
−
 
 
−
* complemento
 
−
tidy html -> http://users.skynet.be/mgueury/mozilla/
 
−
youtube firefox -> http://br.mozdev.org/firefox/youtube
 
−
 
 
−
* para converter
 
−
$ ffmpeg -i arquivo.flv -ab 56 -ar 22050 -b 500 -s 320x240 arquivo.mpg
 

Edição atual tal como às 05h57min de 18 de janeiro de 2009

Configuraçao da màquina:

Toshiba Satellite L30-10T
Processador Intel Core Duo T2080 1,73 GHz
Cache (L2) 1 MB
80GB(5400rpm) SATA
512+512MB DDR2 (533MHz)
15.4" Wide XGA VA (1280 x 800)
DVD-Super-Multi (+-R DL)
ATI Radeon® Xpress 200M con Hypermemory (256 MB)
Wireless 802.11b/g
Ethernet LAN - 10/100 Base-TX
AC adapter input 100~240 V, 3.42A, 50/60 Hz - output 19v
Front Side Bus 667 MHz
Modem 56 Kbps
USB 2.0 2x
PCMCIA 1x
Tamanho(lxpxh) : 358 x 262 x 37 mm
Peso : 2.74 kg

banto@camito:~$ lspci 

00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
09:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
09:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
09:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)

root@camito:#~ fdisk -l

Disk /dev/sda: 80.0 GB, 80026361856 bytes


sistema operacional, aplicativos e drivers

  • GNU/Linux Debian Etch 4.0
  • KDE 3.5


na primeira tela do instalador eu acrescentei: 

install vga=771

E to usando criptografia com lvm

meu sources.list 

# apt-get update
# apt-get upgrade
# apt-get remove iceweasel
# apt-get remove dhcdbd


Placa de Vídeo

configura automáticamente com driver da ati

Placa atheros

acrescente em seu sources.list 

deb http://ftp.br.debian.org/debian stable main non-free contrib

-- baixe os pacotes: 

# apt-get install module-assistant debhelper build-essential wireless-tools madwifi-tools madwifi-source wpasupplicant wpagui

-- compilando: 

# m-a prepare
# m-a a-i madwifi

-- carregado módulo: 

# modprobe ath_pci

retirado de http://banto.hipatia.net/softwarelivre/atheros.html

Placa de som 

$ wget -c ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.15.tar.bz2
$ tar jxvf alsa-driver-1.0.15.tar.bz2
$ cd alsa-driver-1.0.15
$./configure --with-sequencer=yes
$ make
# make install
$ wget -c ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.15.tar.bz2
$ tar jxvf alsa-lib-1.0.15.tar.bz2
$ cd alsa-lib-1.0.15
$ ./configure
$ make
# make install
$ wget -c ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.15.tar.bz2
$ tar jxvf alsa-utils-1.0.15.tar.bz2
$ cd alsa-lib-1.0.15
$ ./configure
& make
# make install
# echo "options snd-hda-intel options snd-hda-intel model=6stack-digout" >> /etc/modprobe.d/alsa-base
# update-modules
# alsaconf

Enconding

por padrao o debian etch vem na codificacao utf-8, ate porque o gnome (interface padrao) usa esse tipo de codificacao. Mas eu uso KDE e todos meus arquivos estao em iso-18

entao eu altero o /etc/environment 

LANG="pt_BR"
LANGUAGE="pt_BR"
LC_ALL="pt_BR"

e com o comando: 

dpkg-reconfigure locales

deixei em pt_BR ISO-8859-1

Desligando Beep

coloco no iniciar do KDE para desligar 

echo '#!/bin/bash' > $HOME/.kde/Autostart/desligasom.sh
echo "xset b off" >> $HOME/.kde/Autostart/desligasom.sh
echo "setterm -blength 0" >> $HOME/.kde/Autostart/desligasom.sh
chmod 777 $HOME/.kde/Autostart/desligasom.sh
Disponível em “https://docs.nkosi.org/index.php?title=Meu_laptop&oldid=2730”