Mudanças entre as edições de "Sk1"
De MochilaWiki
Ir para navegaçãoIr para pesquisar| (5 revisões intermediárias por 3 usuários não estão sendo mostradas) | |||
| Linha 1: | Linha 1: | ||
| − | + | * http://sk1project.org/ | |
| − | + | ||
| − | + | sk1 em debian etch | |
| − | + | ||
| − | + | $ mkdir sk1 | |
| − | + | <source lang="bash"> | |
| − | wget -c http://sk1project.org/downloads/uniconvertor/v1.1.3/uniconvertor-1.1.3.tar.gz | + | $ cd sk1 |
| − | + | $ wget -c http://sk1project.org/downloads/sk1/sk1_0.9.0-rev335-1_i386.deb | |
| + | $ wget -c http://sk1project.org/downloads/tcl_tk/tcl8.5_8.5.0-2_i386.deb | ||
| + | $ wget -c http://sk1project.org/downloads/tcl_tk/tk8.5_8.5.0-3_i386.deb | ||
| + | $ wget -c http://sk1project.org/downloads/pylcms/python-liblcms_1.15-1_i386.deb | ||
| + | # apt-get install python-imaging | ||
| + | # dpkg -i *.deb | ||
| + | </source> | ||
| + | |||
| + | Uniconverter em debian etch: | ||
| + | <source lang="bash"> | ||
| + | $ wget -c http://sk1project.org/downloads/uniconvertor/v1.1.3/uniconvertor-1.1.3.tar.gz | ||
| + | $ tar zxvf uniconvertor-1.1.3.tar.gz | ||
| + | $ cd UniConvertor-1.1.3/ | ||
| + | # apt-get install python-dev python-imaging build-essential | ||
| + | # python setup.py install | ||
| + | </source> | ||
| + | |||
| + | Ubuntu 16.04 | ||
| + | <source lang="bash"> | ||
| + | wget "https://sk1project.net/dc3.php?version=2.0rc2&target=python-sk1-2.0rc2_0ubuntu1_16.04_amd64.deb" -O sk1.deb | ||
| + | sudo dpkg -i sk1.deb | ||
| + | sudo apt-get install -f | ||
| + | </source> | ||
| + | |||
| + | referência | ||
| + | * http://www.edivaldobrito.com.br/corel-draw-para-linux-conheca-sk1/ | ||
| + | |||
| + | [[Categoria:Gráfico]] | ||
Edição atual tal como às 14h03min de 3 de abril de 2017
sk1 em debian etch
$ mkdir sk1
$ cd sk1
$ wget -c http://sk1project.org/downloads/sk1/sk1_0.9.0-rev335-1_i386.deb
$ wget -c http://sk1project.org/downloads/tcl_tk/tcl8.5_8.5.0-2_i386.deb
$ wget -c http://sk1project.org/downloads/tcl_tk/tk8.5_8.5.0-3_i386.deb
$ wget -c http://sk1project.org/downloads/pylcms/python-liblcms_1.15-1_i386.deb
# apt-get install python-imaging
# dpkg -i *.deb
Uniconverter em debian etch:
$ wget -c http://sk1project.org/downloads/uniconvertor/v1.1.3/uniconvertor-1.1.3.tar.gz
$ tar zxvf uniconvertor-1.1.3.tar.gz
$ cd UniConvertor-1.1.3/
# apt-get install python-dev python-imaging build-essential
# python setup.py install
Ubuntu 16.04
wget "https://sk1project.net/dc3.php?version=2.0rc2&target=python-sk1-2.0rc2_0ubuntu1_16.04_amd64.deb" -O sk1.deb
sudo dpkg -i sk1.deb
sudo apt-get install -f
referência
