Meu laptop

Configuraçao da màquina:

Toshiba Satellite L30-10T
Processador Intel Core Duo T2080 1,73 GHz
Cache (L2) 1 MB
Front Side Bus 667 MHz
Chipset ATI Radeon Xpress 200M
Memoria ram DDR2 533 MHz (PC4200)
WideScreen 15,4 inch - WXGA TFT
HD 80 GB - 5400 rpm
DVD-RW
Placa de video ATI Radeon Xpress 200M com 128 MB
LAN 100 Mbps
Wireless 802.11 A/B/G
Modem 56 Kbps
USB 2.0 2x
Firewire (1394a) 1x
PCMCIA 1x
AC adapter input 100~240 V, 50/60 Hz

banto@cajuzinho:~$ lspci

00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
09:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
09:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
09:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)

banto@cajuzinho:~$ df -h

Sist. Arq.            Tam   Usad Disp  Uso% Montado em
/dev/sda1             9,2G  2,1G  6,7G  24% /
tmpfs                 442M     0  442M   0% /lib/init/rw
udev                   10M   56K   10M   1% /dev
tmpfs                 442M     0  442M   0% /dev/shm
/dev/sda6             9,2G  550M  8,2G   7% /home

sistema operacional, aplicativos e drivers

• GNU/Linux Debian Etch 4.0
• KDE 3.5

Placa atheros

acrescente em seu sources.list

deb-src http://ftp.br.debian.org/debian stable main non-free contrib

-- baixe os pacotes:

# apt-get install module-assistant debhelper build-essential wireless-tools madwifi-tools madwifi-source

-- compilando:

# m-a prepare
# m-a a-i madwifi

-- carregado módulo:

# modprobe ath_pci

retirado de http://banto.hipatia.info/softwarelivre/atheros.html

Instalando o driver da ATI

echo "deb http://ftp.br.debian.org/debian/ stable  main contrib non-free" >> /etc/apt/sources.list 
apt-get update 
apt-get install module-assistant fglrx-control fglrx-kernel-src fglrx-driver
m-a update
m-a a-i fglrx-kernel-src
aticonfig --initial

Reinicie o computador.

retirado de forumdebian.com.br

Placa de som

$ wget -c ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.14.tar.bz2
$ tar jxvf alsa-driver-1.0.14.tar.bz2
$ cd alsa-driver-1.0.14
$ ./configure
$ make
# make install
$ wget -c ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.14a.tar.bz2
$ tar jxvf alsa-lib-1.0.14a.tar.bz2
$ cd alsa-lib-1.0.14a
$ ./configure
$ make
# make install
$ wget -c ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.14.tar.bz2
$ tar jxvf alsa-utils-1.0.14.tar.bz2
$ cd alsa-lib-1.0.14a
$ ./configure
& make
# make install
# alsaconf